Tel: +86-29-88255286
Contact Us

Santech Applied Technology Co.,Ltd
Contact: Sherwin Xue
Tel: 86-29-88255286;
Fax: 86-29-85212928
Address: NO.10 Tangyan South Road Xi’an,China.
Postal Code: 710065

Home > News > Content

Titanium Processing Technology

Santech Applied Technology Co.,Ltd | Updated: Jul 04, 2017

Titanium In the case of nickel plating, galvanizing, copper plating and various other plating conditions, galvanized baths made of hardened polyethylene linings were used and supported in the electrolyte by means of columns. However, at higher temperatures, the hardening gas ethylene is cracked due to thermal expansion (the coefficient of thermal expansion of the hard coal gas is 6 times greater than the coefficient of thermal expansion of the steel), Titanium and the integrity of the lining is broken (especially in the weld zone ), Resulting in corrosion of the bath material, thereby contaminating the electrolyte, even in the electrolyte (heavy metal mixture) in the number of corrosion products is not significant is to improve the quality of the coating example of the use of rubber for the lining effect is small, Titanium because the rubber soon to produce Cracked. The lining process and the process of coating a thin layer of rubber are difficult because of the poor adhesion to certain metals. Titanium The use of all existing chemical rubber column suspension protection and insulation methods, in the use of gas or vinyl gas furnace can only be used in the 2 to 3 months during the use of hanging rod. It is uneconomical to have a lot of labor to replace and repair the boom.

The most widely used electroplating technology can be plated with a variety of metal coatings. As we all know, electroplating has been 100 years of history. It is an electrochemical process that uses an electrolytic method to deposit the desired metal or alloy layer on a metal, nonmetallic substrate. Titanium It is an electrochemical processing technique that performs decorative protection and obtains some new properties. Modern from metal surface treatment to the development of non-metallic surface (such as plastic surface) coated with metal coating, Titanium with electrodeposition method has been processed to create a good workpiece and so on. Electrolytic deposition has now been developed from deposited metal to deposited metal coatings and metal composite coatings. Titanium The meaning of electroplating is also constantly developing and widening, it is widely used in machinery, instrumentation, electronics, Titanium light industry, transportation and defense industry and other production sectors, Titanium to improve product quality, Titanium decorative landscaping product appearance, enhance products Anti-corrosion ability to extend the service life of the product play an important role. Electroplating With the use of various new electrolytes, Titanium elevated temperatures and increased current density methods to ensure that the production efficiency of the electroplating layer and to enhance its process, Titanium so the manufacturing of electroplating technology used in the equipment of the structural materials made strictly Claim. In addition to improving the technical performance, the increase in the life of various equipment is of great significance. Titanium This means that the first use of structural materials and lining materials.

In addition to containing boron fluoride or hydrogenated hydrofluoric acid (hydrofluoric acid), titanium does not actually suffer from corrosive solutions in electrolytes used in nickel plating, Titanium copper plating, galvanizing, galvanizing, brass plating, Titanium silver plating erosion. Titanium It is advisable not to use titanium in a medium containing fluoride ions because the corrosion rate is 5 mm / A at the time of interrupting the current and greater than 30 mm / A in the anode system connection condition. In other cases, Titanium the titanium alloy bath is used instead of lead Lining or hard polyvinyl chloride-lined steel baths are reasonable because the process can be stabilized due to the significant reduction in routine maintenance and the purity of the electrolyte is controlled to improve the quality of the coating.